by Pavel Odintsov | Apr 23, 2024
In addition to the capability to inject IP feeds to BGP routing table to block them, we provide the capability to block certain countries from reaching the service. Please note that this approach can be used only for compliance reasons in regulated industries where...
by Pavel Odintsov | Apr 7, 2023
In this guide, we will configure a BGP peering session between your network equipment and FastNetMon. For this manual, you need to configure a BGP peering connection from your router side, and you need to know all the following data: Peering IP for FastNetMon ASN for...
by Pavel Odintsov | Nov 19, 2022
In this guide, we will provide a detailed guide which will help you establish a BGP session between FastNetMon and FRR. FRR is a network routing toolkit which includes support for many routing protocols. In this guide, we will work only with the BGP protocol, and we...
by Pavel Odintsov | Aug 25, 2022
In this guide, we will provide a detailed guide which will help you establish a BGP session between FastNetMon and JunOS / Juniper network devices. To apply commands which alter the configuration of a router, you need to be in JunOS CLI, in configure mode. To switch...
by Pavel Odintsov | Aug 16, 2022
This guide covers FastNetMon’s ability to run BGP announces when total amount of traffic for a group of hosts or networks exceeds a specified threshold. This capability is called total hostgroups and is well covered in this guide. To use this guide, you will...
