by Pavel Odintsov | Sep 19, 2023
To enable sFlow on this switch, you need to make the following configuration changes: feature sflow sflow sampling-rate 4096 sflow max-sampled-size 128 sflow counter-poll-interval 20 sflow max-datagram-size 1400 sflow counter-poll-interval 30 sflow collector-ip...
by Pavel Odintsov | Sep 12, 2023
To configure A10 Networks Thunder to work with FastNetMon, apply the following changes on A10 Networks side: netflow monitor fnm protocol v10 record nat44 destination 10.0.0.100 2055 flow-timeout 1 resend-template timeout 60 source-address ip 10.0.0.1 ! Unfortunately,...
by Pavel Odintsov | Aug 7, 2023
FastNetMon Advanced has complete support for both Netflow v9 and IPFIX telemetry protocols provided by Nokia SR. For all new deployments, we recommend using the IPFIX protocol. If you’re looking for options to detect attacks in 1-3 seconds, please check the...
by Pavel Odintsov | Jun 21, 2023
by Pavel Odintsov | Nov 15, 2022
We suggest the following configuration from ASR 1000 (including 1001-X) series of Cisco routers: flow record netflow_record_v4 match ipv4 tos match ipv4 protocol match ipv4 source address match ipv4 destination address match transport source-port match transport...
